Can each rental guest get a different door code?

Yes. Smart locks hold a code for each guest that works only on the dates you set, plus separate codes for cleaners and family.

Will guests see my cameras on the Wi-Fi?

No. Guests get their own network, and the cameras, locks, and thermostats stay on a separate one.

Can I stop guests from cranking the AC?

Smart thermostats can hold a range you set, and the turnover scene resets them after checkout.

Do you put cameras inside rentals?

No. We install cameras outside only, at the doors and the driveway, and every one is hardwired.

How do I get a quote for a rental?

Call (609) 415-0011, Mon–Fri 8am–6pm, or send the town and the number of bedrooms through the contact page. Quotes follow a free walk-through.

Rentals

Smart Home for Shore Rentals: Codes, Wi-Fi, and Turnovers

By Chris Stefanov · October 15, 2026

A shore rental runs better when each guest gets their own door code, the guest Wi-Fi is separate from your cameras and locks, the thermostats have limits, and one turnover scene resets the house between stays. Izzo Network sets this up for rentals from Long Beach Island to Cape May. Every house is quoted after a free walk-through.

The front door of a shore house at blue hour

A code for every stay

Smart locks hold a separate code for each guest that starts and stops on the dates you set. The cleaners, the handyman, and family each get their own code too. You can see from your phone which code opened the door and when. There's no lockbox and no key to replace.

Guest Wi-Fi on its own network

Guests get a simple network name and password, ideally printed by the door. Your locks, thermostats, and cameras stay on a separate network the guests can't see. Access points are placed so the Wi-Fi reaches every bedroom and the deck, because a weak signal upstairs is the complaint you hear about most.

Thermostat limits

Smart thermostats can keep guests within a range you choose, so the AC isn't set to its lowest with the sliders open. Between stays, the turnover scene sets them back until the next arrival.

One turnover scene

Checkout morning, one press on a keypad or your phone sets the thermostats back, turns off the lights, and closes the shades. The cleaners walk into a house that's already reset, and you can run the arrival scene before the next guest pulls in.

Cameras outside only

Rental cameras belong outside, at the doors and the driveway, and every camera we install is hardwired. Check your local rental rules and your listing platform's rules about disclosing cameras.

Related services and towns

Questions

Can each rental guest get a different door code?: Yes. Smart locks hold a code for each guest that works only on the dates you set, plus separate codes for cleaners and family.
Will guests see my cameras on the Wi-Fi?: No. Guests get their own network, and the cameras, locks, and thermostats stay on a separate one.
Can I stop guests from cranking the AC?: Smart thermostats can hold a range you set, and the turnover scene resets them after checkout.
Do you put cameras inside rentals?: No. We install cameras outside only, at the doors and the driveway, and every one is hardwired.
How do I get a quote for a rental?: Call (609) 415-0011, Mon–Fri 8am–6pm, or send the town and the number of bedrooms through the contact page. Quotes follow a free walk-through.

Free home estimate after a walk-through. Call (609) 415-0011 (Mon–Fri 8am–6pm) or send a short note.